We are happy to work with you and will confirm the details of each job with an official quote.
For your reference, please see the information below as a guideline.
Materials
JuggerBot 3D’s printers have been specifically designed to process performance thermoplastics in both filament and pellet form, including but not limited to:
ABS
(Acrylonitrile Butadiene Styrene)
ASA
(Acrylonitrile Styrene Acrylate)
PLA
(Polylactic Acid)
TPC
(Thermoplastic Copolyester)
PET
(Polyethylene Terephthalate)
PETG
(Polyethylene Terephthalate Glycol)
HIPS
(High Impact Polystyrene)
PC
(Polycarbonate)
PA6/66
(Polyamide 6/66)
PA6/66 + CF
(Carbon Fiber Reinforced Polyamide 6/66)
PEKK + GF
(Glass Fiber Reinforced Polyetherketoneketone)
PEEK + CF
(Carbon Fiber Reinforced Polyetheretherketone)
Process Specifications
Build parts as big as 36” x 36” x 24” with filament, or 36” x 48” x 48” with JuggerBot 3D’s pellet extrusion technology. Tolerances will vary with nozzle size, part size and geometry, and material, but can be as close as +/- 0.005”. Please specify any critical dimensions that need to be met with engineering drawings for reference.
Infill Density
Specify infill percentage to balance part strength, part weight, and print time. Choose from 15%, 30%, 50%, or 75%; please note that increased infill percentage will result in more time and material to print a part. If you do not specify infill density, JuggerBot 3D will elect a percentage based on the specific material and geometry of the part.
Print Quality
Draft Quality
Best for concept models and large parts where surface finish is not a factor. Maximize extruder nozzle size and layer resolution to reduce print time and cost.
Standard Quality
Balances build time and precision to showcase better surface finish and tighter tolerances. Recommended for most parts.
Production Quality
Best for parts with tight tolerances and small features, especially if post-processing is not an option. Smaller nozzles and slower printing will result in longer cycle time. While layers will likely still be visible, surface finish is relatively smooth right off the printer.
Post-processing
Finish Level 1
Removal of support material only
Finish Level 2
Removal of support material, sanded surface
Finish Level 3
Removal of support material, surface sanded and primed/painted
Finish Level 4
Removal of support material, machined surface
Finish Level 5
Removal of support material, surface machined and primed/painted